Sheet & Shape

Both fuses are almost structurally complete, Sol's is all shaped and is ready for sealing prior to covering and Fourn's just needs for the fin and stab to be fitted then she to can be sealed.


Sol's nose and canopy with ply covering all exposed end grain balsa


Remove the canopy and there's plenty of room in the cockpit


Sol's bottom! OK sub fin


Underside of Fourn's balsa/GRP wing top skin, not much depth to fit a 11mm wide servo so it will be glued in position


Both Sol and Fourn have underwing fairings.  Sols was pretty much preformed and Fourn's was made from scraps.  The object protruding from Fourn's wing is a launching aid.  I checked the plans twice but couldn't find a landing aid ;-)