Construction complete

BOR is all in one piece now.  I used three differing types of Glue for the final assembly which included Aliphatic Resin for the rear deck, Epoxy for the deck bulkhead to kicker well and PU glue (gorrila glue) for the foredeck, top edge of the fin case and the kicker well to deck joint.
Since the glues have cured I have filled and faired the foredeck to hull joint, trimmed the rear deck and generally prepared the boat for the remaining layers of fibre glassing which will be taken over the main deck to hull joints finishing at the chine.

The rear deck and the joint between the foredeck and hull have now been glassed, perhaps one more coat of West Systems and the hull could be ready for some paint