more bor

The Dave Creed rudder has been scribed to the hull and rudder tube glued and now fibre glassed to the stock.  I added a tiny amount of packing to the top of the stock to ensure that the trailing edge of the rudder didn't contravene the 1m rule

The continuous loop fairlead has been added to the midship deck bulkhead.  I opted to use balsa parts rather than copious amounts of epoxy glue to hold it all in position. 3/32 brass tubing was used, the top tube will be trimmed a bit shorter post painting

The winch is bolted in position and the kicker well and foredeck are just resting in place.  Although, it would be a bit tricky it is possible to remove and refit the winch from the rear access aperture.  I just hope I never have to.