Work in Progress

During the holiday period I'm trying to do a little bit every day, it soon mounts up and good progress is being made.  Yesterday I tackled the fin aperture, the day before I fitted the kicker well and today I made and fitted the deck fittings and also applied resin to the underside of the deck.

Marking out and preparing to cut the aperture

This view is of the underside of the foredeck, you can make out the 3 stainless rods which the jib boom tacks will hook onto

The underside of the deck, pot, winch and rudder servo apertures.  Mainsheet turning block reinforcement, continuous loop and jib sheet fairlead which is just in front of the kicker well.  The foredeck, mast ram is also in shot and the freeboard 'EDGE' rebate is showing up well.