A Second

Today the new Vertex hull had it's first layer of FG trimmed back and was lightly sanded.  After quick wash with fresh water and dried I went back to my old trick of spraying the hull with a light mist of 3M spray mount.  Then I carefully covered the hull with another layer of 200g/m2 of fibre glass.  With a bit of manipulation practically all the creases can be removed and wetting out is soooo much easier when the FG isn't moving about but quite firmly adhered to the previous and first layer of FG.

These photo's were taken after three quarters of the hull had been wetted out.  The area awaiting the resin is firmly tacked to the hull which makes life a lot easier and less stressful.